rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
seb2320
 
Posts: 2
Joined: Wed Dec 07, 2022 9:21 am

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

Post by seb2320 »

Hello,
I just bought a FEATHER EPS32 V2 and I can't get it to work.
I have followed all the process indicated on your site in order to configure ARDUINO IDE, the card is well recognized on the COM3 port, the transfer of the sketch example "blink" goes well, but it does not launch after the reset of the card. The serial monitor shows me this message over and over:
ets Jul 29 2019 12:21:46
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 271414342, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13132
load:0x40080400,len:3036
entry 0x400805e4
I tried to reset the card to factory configuration with https://nabucasa.github.io/esp-web-flasher/, test with several parameters in IDE ARDUINO but nothing changes.
Please help me with this problem.

Translated with www.DeepL.com/Translator (free version)

User avatar
mikeysklar
 
Posts: 13936
Joined: Mon Aug 01, 2016 8:10 pm

Re: rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

Post by mikeysklar »

Can you post a photo of your Tools Menu from the Arduino IDE drop down? I'd like to confirm the settings you are using for upload.

User avatar
seb2320
 
Posts: 2
Joined: Wed Dec 07, 2022 9:21 am

Re: rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

Post by seb2320 »

thank you for your answer.
I bought a second card to compare and it works perfectly so the first one was faulty.

User avatar
mikeysklar
 
Posts: 13936
Joined: Mon Aug 01, 2016 8:10 pm

Re: rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

Post by mikeysklar »

Thank you for the feedback.

Did you purchase the original (non-working) in the last month? We can start a refund / replacement for that unit.

Locked
Please be positive and constructive with your questions and comments.

Return to “Feather - Adafruit's lightweight platform”