Order 662714 12/10/2022
Just got this yesterday.
Soldered one speaker pin and one trigger switch.
Plugged into computer with previously tested data compatible USB cable.
Green and red lights are on, computer does not see sound board.
Green and red lights are on with different power source.
pins 0,1,2,3,6,7 .6mv
pins 4,9,10 .85v
Please advise
Thanks
New 2220 Audio FX Sound Board Not Working
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: New 2220 Audio FX Sound Board Not Working
Post a photo showing your hardware and connections and we'll take a look. 800x600 images usually work best.
- twier
- Posts: 2
- Joined: Wed Dec 28, 2022 11:27 am
Re: New 2220 Audio FX Sound Board Not Working
Mike, here are the pictures.
- Attachments
-
- IMG_0311.jpg (147.81 KiB) Viewed 93 times
-
- IMG_0310.jpg (159.32 KiB) Viewed 93 times
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: New 2220 Audio FX Sound Board Not Working
Thank you.
The solder joint on trigger pin 11 looks like it hasn't made a good bond with the pad, but that wouldn't cause the low voltages you've measured on the other pins.
Send a note containing a link to this page and your order number to [email protected]. The folks there will get you a replacement.
The solder joint on trigger pin 11 looks like it hasn't made a good bond with the pad, but that wouldn't cause the low voltages you've measured on the other pins.
Send a note containing a link to this page and your order number to [email protected]. The folks there will get you a replacement.
Please be positive and constructive with your questions and comments.