Arduino Yun PoE module

For other supported Arduino products from Adafruit: Shields, accessories, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
aud1073ch
 
Posts: 7
Joined: Wed Aug 20, 2008 1:20 am

Arduino Yun PoE module

Post by aud1073ch »

I have a couple of the older Arduino Yun boards, that have the vias to install a PoE module. Will the modules sold by Adafruit fit the Yun boards?

User avatar
adafruit_support_mike
 
Posts: 67391
Joined: Thu Feb 11, 2010 2:51 pm

Re: Arduino Yun PoE module

Post by adafruit_support_mike »

I honestly don't know.

What's the distance between the two innermost pins for the PoE connection on your Yun?

User avatar
aud1073ch
 
Posts: 7
Joined: Wed Aug 20, 2008 1:20 am

Re: Arduino Yun PoE module

Post by aud1073ch »

The spacing if the pins near the center gap is 1.2 inches pin center to pin center. Pin spacing is 0.1 inches. 4pins on one side, 6 pins on the other side. Spacing between outside pins is 2 in.

User avatar
adafruit_support_mike
 
Posts: 67391
Joined: Thu Feb 11, 2010 2:51 pm

Re: Arduino Yun PoE module

Post by adafruit_support_mike »

That sounds like it should match the pin spacing of this one:

https://www.adafruit.com/product/3848

It would probably be a good idea to check the actual pin connections in the Arduino forum:

https://forum.arduino.cc/

The Yun documentation doesn't seem to say anything about the PoE headers or pinout.

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Arduino products from Adafruit”