Metro possible defective?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- creag
- Posts: 3
- Joined: Mon Jul 18, 2011 10:23 pm
Metro possible defective?
This is my first metro board so its possible I'm just an idiot. But I've got the board powered with USB and I can program it. However when I just connect the barrel power connector the board doesn't power on (no lights no nothing). I measured 12V on the barrel connector and I measured 12V at the pin of the barrel connector on the board all looks good 12V. But VIN measures 0v. I suspect that because the ON LED isn't lit and I'm measuring 0V at VIN something wonky is going on?
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Metro possible defective?
Check the power switch next to the jack to ensure it is in the on position.
- creag
- Posts: 3
- Joined: Mon Jul 18, 2011 10:23 pm
Re: Metro possible defective?
thank you sir. I didn't notice it for some reason. I shall refrain from deleting this thread out of sheer embarrassment in case it helps some future idiot like myself.
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Metro possible defective?
Don't worry, I missed the switch the first time I used one myself.
Please be positive and constructive with your questions and comments.