Max amps for 2-Way 2.1mm Barrel Jack Splitter

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
Jorsan_321
 
Posts: 1
Joined: Wed Mar 08, 2023 11:43 am

Max amps for 2-Way 2.1mm Barrel Jack Splitter

Post by Jorsan_321 »

Hey there,

I have a question regarding the 2-Way 2.1mm Barrel Jack Splitter (https://www.adafruit.com/product/1351).

I would like to know how much amps it is rated for, including the branch lines.
The plan is to run around 4 amps 12v through this thing.

Thanks in advance!

User avatar
mikeysklar
 
Posts: 13936
Joined: Mon Aug 01, 2016 8:10 pm

Re: Max amps for 2-Way 2.1mm Barrel Jack Splitter

Post by mikeysklar »

Seems reasonable. We don't have a datasheet for this product to confirm so I wouldn't go much over 4A as this uses about .6' of 24AWG wire.

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”