I purchased and want to use a QTPY RP2040 but I have been unable to get the board information so arduino ide can recognize a port. I downloaded SAMD but this my board is the RP2040. There is no QTPY listed in the RP2040 board info.
I am using the qtpy to set up temp/hum and light sensor with an OLED. Thanks for the help.
QTPY rp2040 arduino ide board info
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_carter
- Posts: 29483
- Joined: Tue Nov 29, 2016 2:45 pm
Re: QTPY rp2040 arduino ide board info
The board support for the QT Py RP2040 is in a different Board Support Package than for the SAMD based boards.
You'll want to install the Arduino Philhower core for using the QR Py RP2040.
See here for Arduino setup:
https://learn.adafruit.com/adafruit-qt- ... -ide-setup
You'll want to install the Arduino Philhower core for using the QR Py RP2040.
See here for Arduino setup:
https://learn.adafruit.com/adafruit-qt- ... -ide-setup
Please be positive and constructive with your questions and comments.