QTPY rp2040 arduino ide board info

For other supported Arduino products from Adafruit: Shields, accessories, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
pheintz
 
Posts: 1
Joined: Thu Dec 20, 2018 9:58 pm

QTPY rp2040 arduino ide board info

Post by pheintz »

I purchased and want to use a QTPY RP2040 but I have been unable to get the board information so arduino ide can recognize a port. I downloaded SAMD but this my board is the RP2040. There is no QTPY listed in the RP2040 board info.

I am using the qtpy to set up temp/hum and light sensor with an OLED. Thanks for the help.

User avatar
adafruit_support_carter
 
Posts: 29056
Joined: Tue Nov 29, 2016 2:45 pm

Re: QTPY rp2040 arduino ide board info

Post by adafruit_support_carter »

The board support for the QT Py RP2040 is in a different Board Support Package than for the SAMD based boards.

You'll want to install the Arduino Philhower core for using the QR Py RP2040.

See here for Arduino setup:
https://learn.adafruit.com/adafruit-qt- ... -ide-setup

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Arduino products from Adafruit”