Hi,
I have 2 itsy bitsy boards (5V 16Mhz), that were connected in serial and had an LCD display each. Been working fine for several months now, but today all of the sudden, the LCDs started glitching and since then I've been unable to upload new sketches.
Are they fried? I've had them for at least one year, didn't do anything different...
Tried using the reset button, but that didn't help. Double tapping it turns on an orange LED but still can't upload after that. Either it starts and then resets the com port (sometimes even not selectable), or just hangs. Tried with another USB cable too.
Didn't smell burnt or anything...
2 Itsy Bitsy boards not responding
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- K212
- Posts: 14
- Joined: Wed May 18, 2022 11:42 am
Re: 2 Itsy Bitsy boards not responding
Links to images on how the boards look like now, in case someone can see something
bottom:
https://yourimageshare.com/ib/GzKXCPBl8V
top:
https://yourimageshare.com/ib/3oagAx6vft
bottom:
https://yourimageshare.com/ib/GzKXCPBl8V
top:
https://yourimageshare.com/ib/3oagAx6vft
- K212
- Posts: 14
- Joined: Wed May 18, 2022 11:42 am
Re: 2 Itsy Bitsy boards not responding
Nvm, fixed it following the steps from Ack "I did something" from here;
https://learn.adafruit.com/adafruit-fea ... logger/faq
My code has some pointers that I believe are crashing the program, which caused the board to not respond.
https://learn.adafruit.com/adafruit-fea ... logger/faq
My code has some pointers that I believe are crashing the program, which caused the board to not respond.
Please be positive and constructive with your questions and comments.