Hi Folks,
I'm not sure where to post this but the page (https://www.adafruit.com/product/4421) has a fairly important error in the description for the mating connector. The page has this at the bottom:
"For the matching connector, you'll need a 22-pin 0.5mm pitch top contact FPC connector such as Molex 5051102291".
This part is actually a bottom contact connector. Molex makes a few that will work. P/N: 50348002200 is a dual contact (top and bottom) and # 524352271 is a top connector.
Hope this makes sense.
Richard
4421 TFT display page has an error in it.
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: 4421 TFT display page has an error in it.
Sorry, I'm not clear on the error: do you mean the Molex 5051102291 isn't compatible with that display?
- rcooke
- Posts: 7
- Joined: Tue May 24, 2011 4:44 pm
Re: 4421 TFT display page has an error in it.
Hi Mike,
I apologize for not being clear but I think the description is incorrect. It mentions "top" but the correct connector is a "bottom" type.
Hope this makes sense.
Richard
I apologize for not being clear but I think the description is incorrect. It mentions "top" but the correct connector is a "bottom" type.
Hope this makes sense.
Richard
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: 4421 TFT display page has an error in it.
Ah, I see what you mean.
The Molex 5051102291's contacts are on the bottom, so it does match the display properly. The word 'top' is a typo.
I'll let the folks who handle the shop know about it. Thank you.
The Molex 5051102291's contacts are on the bottom, so it does match the display properly. The word 'top' is a typo.
I'll let the folks who handle the shop know about it. Thank you.
- adafruit2
- Posts: 22200
- Joined: Fri Mar 11, 2005 7:36 pm
Re: 4421 TFT display page has an error in it.
woops fixed!
Please be positive and constructive with your questions and comments.