Voice changer options

Adafruit Ethernet, Motor, Proto, Wave, Datalogger, GPS Shields - etc!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
Desperate_dad
 
Posts: 6
Joined: Wed Feb 22, 2023 10:31 am

Voice changer options

Post by Desperate_dad »

Hi all,
Quick question on the wave shield voice changer project that can be found in the Adafruit
https://learn.adafruit.com/wave-shield-voice-changer
It says to use an a Metro 328 but then I would have to learn that language.
Can I use a Metro M0 Express or M4 so I can standardise on Circuit Python?
Will either of these give me the same possibilities as the 328 or even more?
Thanks in advance for your help

User avatar
mikeysklar
 
Posts: 13824
Joined: Mon Aug 01, 2016 8:10 pm

Re: Voice changer options

Post by mikeysklar »

This shield really needs to be used with older models of Arduino boards. It will not work with M0/M4 based boards in Arduino due to the use of registers in the driver code. It also does not have a library for CircuitPython.

The Monster M4SK mask has a voice changer mode (still Arduino based):

https://learn.adafruit.com/adafruit-mon ... -changer-2

You can also use a Raspberry Pi for real time voice changing.

https://planet-geek.com/2015/10/29/hack ... halloween/

Locked
Please be positive and constructive with your questions and comments.

Return to “Arduino Shields from Adafruit”