Hi.
I have found this old board and tried to make it work.
the wifi firmware checked shows and old version and that it needs to be upgraded, i have uploaded the FirmwareUpdater code to the board with the line:`WiFi.setPins(8,7,4,2);` as instructed by the portal (adafruit).
the flash was successful, the serial monitor is turned off, however when opening the wifi101 firmware updater i don't seem to be able to find my board, the select box is empty. in the arduino ide the /dev/ttyUSB0 still appears and identifies my board correctly, but the firmware updater does not seem to discover my board.
It's arduino ide 2.0.4 , not java anymore and electron\react\js\ts in general is not my cup of tea and the code doesn't make a whole lot sense to me.
Any extra config i need to set up for this to work ? for the wifi firmware updater to recognize my board ?
cannot upgrade ATWINC1500 module on adafruit samd21 m0 with ATWINC1500
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- eyalgal
- Posts: 1
- Joined: Tue Mar 14, 2023 3:51 am
- mikeysklar
- Posts: 13936
- Joined: Mon Aug 01, 2016 8:10 pm
Re: cannot upgrade ATWINC1500 module on adafruit samd21 m0 with ATWINC1500
Since this is an older board I'd try this with the 1.8.19 Legacy Arduino IDE.
Please be positive and constructive with your questions and comments.