I need to build about 30 small devices to perform a small monitoring task and looking for hardware suggestions. The controller would be bare minimum, but with WiFi obviously. And, since I'm building 30 of these, I really want the lowest cost option.
I have a machine that contains a small 110VAC fan. Any time the fan turns on or off, I would like my device to send a notice to a web server. So logically, it polls an input pin to determine the state, if different, then it sends a HTTP GET request to a REST endpoint with a ON/OFF status.
Any suggestions?
Suggestion for microcontroller for IoT project
Moderators: adafruit_support_bill, adafruit
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
- roknjohn
- Posts: 5
- Joined: Wed Apr 25, 2018 12:22 pm
- mikeysklar
- Posts: 14194
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Suggestion for microcontroller for IoT project
It's hard to beat the $6 Pico W for inexpensive WiFi. If the controllers will be locate a good distance from an access point you should consider a unit with an Antenna like this Qt Py ESP32-S2 w/Antenna Port
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.