Hi,
I have been having trouble getting my cam. mod. 3 to work with my RPI 4 8GB.
I am noticing others are having this issue on the rpi forums, as well.
I was told to contact the supplier I purchased from as the issue may be hardware related.
Here is a link describing the software troubleshooting I've done thus far:
https://forums.raspberrypi.com/viewtopi ... 2#p2092032
I will continue to test, but let me know if there is any suggestions y'all can provide for this.
Thank you.
Camera Module 3
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- mikeysklar
- Posts: 13936
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Camera Module 3
The camera is being detected.
Are you running the graphical desktop of Bullseye? You should see a window with the camera output for 5 seconds when you ran libcamera-hello.
There are some more test commands you can run here:
https://www.raspberrypi.com/documentati ... ng-started
Are you running the graphical desktop of Bullseye? You should see a window with the camera output for 5 seconds when you ran libcamera-hello.
There are some more test commands you can run here:
https://www.raspberrypi.com/documentati ... ng-started
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/