Compatibility of RPi camera flex cables

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
Quinten_
 
Posts: 1
Joined: Tue Mar 28, 2023 6:15 am

Compatibility of RPi camera flex cables

Post by Quinten_ »

Just wanted to make sure before I order: does the Flex Cable (https://www.adafruit.com/product/1731) work with the RPi camera v2 board (https://www.adafruit.com/product/3099)? The cable's product page says
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
However, I'm not sure if that hasn't been updated or if this cable does not work with newer models. The connector seems the same...

User avatar
adafruit_support_carter
 
Posts: 29056
Joined: Tue Nov 29, 2016 2:45 pm

Re: Compatibility of RPi camera flex cables

Post by adafruit_support_carter »

Yep, it'll work. The V2 camera uses the same cable.

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”