airlift example code
Moderators: adafruit_support_bill, adafruit
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
- davidsi
- Posts: 83
- Joined: Tue Oct 01, 2013 8:46 pm
airlift example code
is there any sample code for the airlift co processor in C, not python? I am having a hard time understanding how to program the co processor.
- jerryn
- Posts: 1868
- Joined: Sat Sep 14, 2013 9:05 am
Re: airlift example code
I'm not sure what you are trying to do or what boards you are using, but there are guides to using an AirLift with the Arduino IDE here
https://learn.adafruit.com/adafruit-air ... ng/arduino
and for upgrading the Firmware on an Airlift here:
https://learn.adafruit.com/upgrading-es ... e/overview
and
The NINA Firmware is here if you want to modify it.
https://github.com/adafruit/nina-fw
I hope that helps.
Note: I do not represent Adafruit. Just trying to help.
https://learn.adafruit.com/adafruit-air ... ng/arduino
and for upgrading the Firmware on an Airlift here:
https://learn.adafruit.com/upgrading-es ... e/overview
and
The NINA Firmware is here if you want to modify it.
https://github.com/adafruit/nina-fw
I hope that helps.
Note: I do not represent Adafruit. Just trying to help.
- davidsi
- Posts: 83
- Joined: Tue Oct 01, 2013 8:46 pm
Re: airlift example code
thanks for your answer but it does not help. I have the Adafruit 4201 Airlift – ESP32 WiFi Co-Processor Breakout Board, not a feather board. Which seemingly I can not attach to the Arduino IDE
- jerryn
- Posts: 1868
- Joined: Sat Sep 14, 2013 9:05 am
Re: airlift example code
This guide should cover that: https://learn.adafruit.com/adafruit-air ... ut/arduino
- davidsi
- Posts: 83
- Joined: Tue Oct 01, 2013 8:46 pm
Re: airlift example code
so if I read that correctly, I don't need to program the airlift at all, just communicate with it? That would be awesome
- jerryn
- Posts: 1868
- Joined: Sat Sep 14, 2013 9:05 am
Re: airlift example code
Yes, you may need to update the Airlift firmware as described in an earlier link, but first you should be just able to use it as is to test it out.
- davidsi
- Posts: 83
- Joined: Tue Oct 01, 2013 8:46 pm
Re: airlift example code
is there an LED that is supposed to light up if it has power across 5v/Gnd?
- jerryn
- Posts: 1868
- Joined: Sat Sep 14, 2013 9:05 am
Re: airlift example code
Looking at the schematic on the guide for the Airlift Breakout, I do not see an LEB on the input power.
https://learn.adafruit.com/adafruit-air ... /downloads
https://learn.adafruit.com/adafruit-air ... /downloads
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.