SCD30 hanging

Moderators: adafruit_support_bill, adafruit

Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
Locked
User avatar
mwillems
 
Posts: 1
Joined: Fri May 05, 2023 12:37 pm

SCD30 hanging

Post by mwillems »

Hi!

I have three boxes that use an Adafruit SCD30 CO2 sensor, connected via I2C to an Arduino Nano. (As well as an atmospheric pressure sensor and a real-time clock). I am, of course, using the Adafruit SCD30 library.

All these devices work, but all three of these boxes hang up every few days, with what I strongly suspect is the SCD30 hanging up the I2C bus.

I would include the PDF I wrote about my boxes (with photos, code, circuit etc) but it's too big to be included here, alas.

Any help welcome.

Michael

User avatar
barshatriplee
 
Posts: 200
Joined: Wed Mar 22, 2023 10:11 am

Re: SCD30 hanging

Post by barshatriplee »


Locked
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.

Return to “Internet of Things: Adafruit IO and Wippersnapper”