Hello!
I’ve finally ordered a hot air rework station and have only hand soldered with an iron previously.
I was wondering if there’s any particular recommendations.
Looking at the Chipquik site I’m thinking:
- Solder Paste no clean Sn96.5/Ag3.0/Cu0.5 Lead-Free in 10cc syringe 35g (T3)
Model #: SMD291SNL10
I assume T3 particle size is fine/preferred for 0805 and 0603 SMT?
Thanks!
Recommend a lead free solder paste?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- barshatriplee
- Posts: 200
- Joined: Wed Mar 22, 2023 10:11 am
Re: Recommend a lead free solder paste?
I would have suggested makerpaste but it is out of stock: https://www.adafruit.com/product/3217
Sparkfun had some lead free solder pastes too. But those are also out of stock.
Sparkfun had some lead free solder pastes too. But those are also out of stock.
Please be positive and constructive with your questions and comments.