LSM303AGR wont communicate with adafruit lib

Play with it! Please tell us which board you're using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
batman420
 
Posts: 2
Joined: Thu May 19, 2016 5:41 pm

LSM303AGR wont communicate with adafruit lib

Post by batman420 »

i have the LSM303AGR breakout board.
1. it scans and comes up with 2 i2c address
I2C scanner. Scanning ...
Found address: 25 (0x19)
Found address: 30 (0x1E)
There is/are 2 device(s).
2. install all the lib as instructed over here
https://learn.adafruit.com/lsm303-accel ... out/coding
3. when i run the magsensor example, i get this error
Magnetometer Test

Ooops, no LSM303 detected ... Check your wiring!

I see no issues with the hardware setup and i am using this sensor with arduino nano and this i2c adapter https://store.ncd.io/product/i2c-shield ... uino-nano/

any help will be appreciated!!!!

Locked
Please be positive and constructive with your questions and comments.

Return to “Circuit Playground Classic, Circuit Playground Express, Circuit Playground Bluefruit”