Hello,
does anybody have 3D models for any of the following sensors, or 3D models for mounts for these sensors?
We're building a case for a data logger here https://github.com/OpenDevEd/case-for-p ... er-rev0.98 (open-scad) and want to mount various Adafruit sensors onto the case. If anybody has 3D models for the sensors or mounts, we'd appreciate you.
* Adafruit AHT20
* Adafruit BH1750
* Adafruit I2S MEMS
* Adafruit Sensirion SHT45
* Adafruit MCP9808
We're also putting on one of the Pimoroni sensors (LTR-559), so if anybody has a model for this, we'd appreciate that too!
(Incidentally, as you can see, we're doubling up on many of these sensors, but we're doing this to be able to compare how the sensors perform in the field.)
Many thanks!
Integrating Adafruit sensors in 3D-printed cases
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- bjohas
- Posts: 27
- Joined: Sun Nov 30, 2014 7:58 am
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Integrating Adafruit sensors in 3D-printed cases
We have a growing library of 3D CAD models up on Github. It is still a work in progress. So you may not find all of the parts you are looking for.
https://github.com/adafruit/Adafruit_CAD_Parts
https://github.com/adafruit/Adafruit_CAD_Parts
- bjohas
- Posts: 27
- Joined: Sun Nov 30, 2014 7:58 am
Re: Integrating Adafruit sensors in 3D-printed cases
How amazing is that!!
Thank you so much!
Thank you so much!
- bjohas
- Posts: 27
- Joined: Sun Nov 30, 2014 7:58 am
Re: Integrating Adafruit sensors in 3D-printed cases
Just to add that we've put some tidied up code here: https://github.com/OpenDevEd/sensors-openscad
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Integrating Adafruit sensors in 3D-printed cases
Nice! Thanks for sharing your work.
Please be positive and constructive with your questions and comments.