Hi
Wanted to try CP Bare Metal on the Raspberry Pi Zero. I have set up as per instructions and a get the following screen on boot, but thats as far as it gets regardless of additional python code I add. The USB fails to enumerate on windows and linux. I also cant see any debug output on the UART. Any advice appreciated. Many thanks
"Done | 8.1.0
Adafruit Circuitpython 8/1/0 on 2023-50-22; Raspberry
Pi Zero with bcm2835
Board ID:raspberrypi_zero
UID:............C3"
Raspberry PI Bare Metal Failing
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- danhalbert
- Posts: 4688
- Joined: Tue Aug 08, 2017 12:37 pm
Re: Raspberry PI Bare Metal Failing
There was a regression in this build in recent versions. It is being tracked and debugged here:
https://github.com/adafruit/circuitpython/issues/8044
https://github.com/adafruit/circuitpython/issues/8044
- bobtrex
- Posts: 22
- Joined: Sat Sep 01, 2018 12:28 pm
Re: Raspberry PI Bare Metal Failing
Ah, Got it , many thanks
I will try a Zero2W, and PI4
I will try a Zero2W, and PI4
Please be positive and constructive with your questions and comments.