We have received TCA9548a multiplexer for our PCB circuit. The drawing and size on the website is different than what we have received.
As per information on the website the center to center distance between two pin holes is 0.6 inch. However, the received product has 0.7 inch which is causing mounting problems to PCB.
I have attached an image. Please find.
The weblink is as follows:
(https://learn.adafruit.com/adafruit-tca ... dBU6Qg94Wk)
Please help.
Ahmed
Adafruit Multiplexer TCA9548a - Sizing Problem
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- ahmedzz1993
- Posts: 1
- Joined: Wed May 31, 2023 6:48 am
Adafruit Multiplexer TCA9548a - Sizing Problem
- Attachments
-
- TCA9548a Multiplexer_Should be 0.6 inch.jpg (403.91 KiB) Viewed 45 times
- adafruit_support_bill
- Posts: 88089
- Joined: Sat Feb 07, 2009 10:11 am
Re: Adafruit Multiplexer TCA9548a - Sizing Problem
Where did you purchase the board? It does not look like one of ours.
Please be positive and constructive with your questions and comments.