I have a project I am working on where I would be using two trinket M0s under one enclosure and I was wondering if they could be powered by the same battery and switch instead of using two separate.
I am newbie to using lipoly battery packs and batteries in general and not sure what the best method to go about this problem.
Thanks in advance.
Two Trinket M0s, One battery Source
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- dastels
- Posts: 15829
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Two Trinket M0s, One battery Source
I don't see a problem with that. You'd want a splitter. I don't see any in the shop but you could make one (be careful to protect against shorts... LiPos really don't like shorts) using https://www.adafruit.com/product/3814 and https://www.adafruit.com/product/261.
Dave
Dave
- michaelmeissner
- Posts: 1831
- Joined: Wed Aug 29, 2012 12:40 am
Re: Two Trinket M0s, One battery Source
Or if you are using a USB power bank, you can use something like:
- https://www.adafruit.com/product/3030
- https://www.adafruit.com/product/2998
- Or use a power bank with more than one USB A port.
Please be positive and constructive with your questions and comments.