Attiny2313 fuses help!!

SpokePOV kit for bikes

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
aditya_g8
 
Posts: 5
Joined: Fri Nov 14, 2008 2:57 pm

Attiny2313 fuses help!!

Post by aditya_g8 »

What are the fuses to be set when programing a SPoke POV??

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Attiny2313 fuses help!!

Post by adafruit »

look in the makefile

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Attiny2313 fuses help!!

Post by kayrock66 »

The code can be modified to change the internal clock speed without requiring any particular fuse setting. This would get rid of the extra step of setting fuses.
Last edited by kayrock66 on Fri Oct 02, 2009 12:07 pm, edited 1 time in total.

vvs
 
Posts: 15
Joined: Wed Sep 30, 2009 6:20 am

Re: Attiny2313 fuses help!!

Post by vvs »

...I have such question :
..in a project minipov was talked : "...Note: if you are trying this out with a new microcontroller (i.e. not from a kit) you'll need to burn the fuses first, otherwise it won't work right and might not be programmable. Run make burn-fuse before you type in make program-minipov, while the minipov is powered and connected to the serial port. You might have to do it a couple of times if its failing. ..."
In the project of Spok POV is it needed to conduct such action ?

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Attiny2313 fuses help!!

Post by kayrock66 »

Only if you bought your own microcontroller from a source other than LadyAda.

vvs
 
Posts: 15
Joined: Wed Sep 30, 2009 6:20 am

Re: Attiny2313 fuses help!!

Post by vvs »

thank you
...stop.
if microcontroller from a source other than LadyAda, what actions do need to be executed before programming?

haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: Attiny2313 fuses help!!

Post by haak »

I checked makefile but there are some strange fuses and even efuse is missing!
please could you write down avrdude arguments for me (us)?
regards

EEdy
 
Posts: 20
Joined: Mon Jun 03, 2013 11:06 pm

Re: Attiny2313 fuses help!!

Post by EEdy »

i have the same questions here, what do i need to do if i bought a chip from somewhere else?

Locked
Please be positive and constructive with your questions and comments.

Return to “SpokePOV (discontinued)”