I have a raspberry pi c onnected to an XBee S6B (WiFi), are there any commands I can send to an XBee (S6B) from my raspberry pi to establish if there are any established connections to it?
I would like to monitor whether my laptops TCP connection is connected/disconnected to the XBee WiFi device, but from the Raspberry PI end.
XBee connection status
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: XBee connection status
See page 97 of the user guide:
http://ftp1.digi.com/support/documentation/90002180.pdf
You can try to send a packet, then look at the transmission status returned. If you get a status of 0x77, then there is no TCP connection.
http://ftp1.digi.com/support/documentation/90002180.pdf
You can try to send a packet, then look at the transmission status returned. If you get a status of 0x77, then there is no TCP connection.
Please be positive and constructive with your questions and comments.