Finger print sensor R307

Breakout boards, sensors, other Adafruit kits, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Finger print sensor R307

Post by YASHASWINI »

We have brought r307 fingerprint sensor.ithas got 6 six pin wires we connected red wire-vcc
Black- ground
Green -2
White -3
Yellow-a0
Blue-3.3v
We need suggestions please do help us

User avatar
adafruit_support_carter
 
Posts: 29056
Joined: Tue Nov 29, 2016 2:45 pm

Re: Finger print sensor R307

Post by adafruit_support_carter »

Can you please post a photo of your setup showing how you have everything connected.

User avatar
adafruit2
 
Posts: 22111
Joined: Fri Mar 11, 2005 7:36 pm

Re: Finger print sensor R307

Post by adafruit2 »

looks like the wire colors changed
use the order of the wires GND-RX-TX-POWER, not the colors, we'll yell at the factory!

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

This s how we hv connected it...the thing is we ran library adafruit fingerprint code enroll and fingerprint
We are getting communication error
Sensor is getting detected and it ask to enter id and after entering it it asks us to place the sensor after that communication error
What s the error
What would hv went wrong
Please do help wit us as soon as poosible
Attachments
Screenshot_2018-03-27-20-58-18.png
Screenshot_2018-03-27-20-58-18.png (285.61 KiB) Viewed 2431 times

User avatar
adafruit2
 
Posts: 22111
Joined: Fri Mar 11, 2005 7:36 pm

Re: Finger print sensor R307

Post by adafruit2 »

please show a clear photo of how you have it wired up

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

R307 has 6 pins what to connect..r we supposed to change the library code

User avatar
adafruit2
 
Posts: 22111
Joined: Fri Mar 11, 2005 7:36 pm

Re: Finger print sensor R307

Post by adafruit2 »

nope, use only the first 4

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

This s how we have connected
Attachments
IMG-20180327-WA0007.jpg
IMG-20180327-WA0007.jpg (121.12 KiB) Viewed 2421 times
IMG-20180327-WA0009.jpg
IMG-20180327-WA0009.jpg (145.94 KiB) Viewed 2421 times

User avatar
adafruit2
 
Posts: 22111
Joined: Fri Mar 11, 2005 7:36 pm

Re: Finger print sensor R307

Post by adafruit2 »

are those wires from the sensor soldered or just taped together

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

Please do hlp us with this.. Asap

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

Ya thoso wires are soldered

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

We have demo tommorrow plz kindly come up with a solution

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

This is the error we got when we ran the code. Opening with serial monitor
Attachments
Screenshot_2018-03-27-21-33-23.png
Screenshot_2018-03-27-21-33-23.png (81.83 KiB) Viewed 2413 times

User avatar
adafruit2
 
Posts: 22111
Joined: Fri Mar 11, 2005 7:36 pm

Re: Finger print sensor R307

Post by adafruit2 »

hmm it found the sensor, could be the wires are too long? you could keep trying. to enroll, we cant guarantee you'll get it working by tomorrow

User avatar
YASHASWINI
 
Posts: 12
Joined: Mon Mar 26, 2018 6:47 am

Re: Finger print sensor R307

Post by YASHASWINI »

Actually it got worked with 4 pins as you said. The four pins we connected and it worked Thank you for your support

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Products from Adafruit”