Good morning,
I was wondering if the USBtinyISP works with the ATtiny416 (and its smaller siblings 212, 214, 412, 414)? These processors use the newer Unified Program and Debug Interface (UPDI).
Thank you!
rje
ATtiny416
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- mikeysklar
- Posts: 14194
- Joined: Mon Aug 01, 2016 8:10 pm
Re: ATtiny416
@rje,
This is the first I've seen on UPDI (I know it has been around for 3+ years), but it snuck in while I was using other devices.
Our TinyISP programmers do not support UPDI.
However, you can rig up a Raspberry Pi or Arduino for UPDI.
pyupdi
https://github.com/mraardvark/pyupdi
jtag2updi
https://github.com/ElTangas/jtag2updi
This is the first I've seen on UPDI (I know it has been around for 3+ years), but it snuck in while I was using other devices.
Our TinyISP programmers do not support UPDI.
However, you can rig up a Raspberry Pi or Arduino for UPDI.
pyupdi
https://github.com/mraardvark/pyupdi
jtag2updi
https://github.com/ElTangas/jtag2updi
Please be positive and constructive with your questions and comments.