I'm trying to build the pianoglove (https://learn.adafruit.com/pianoglove) with flora, VS1053 audio codec, and RGB color sensor TCS34725. I'm building it on a breadboard, with a breadboard power supply 3.3V. I assemble them together just as instructed. I can successfully upload the code for pianoglove, but nothing happens after that. Even when I move a color strip back and forth above the color sensor, there are no sounds coming from the headphones.
We're hoping that through the help of pianoglove, people with visual impairment can hear the colors, and to take a step further, feel it through the DRV2605 haptic driver. Any help/advice is much appreciated!
Different than that in the guide:
1. My color sensor is different from the original (mine is https://www.adafruit.com/product/1334, RGB Color Sensor with IR filter and White LED - TCS34725); I can plug it on the breadboard. So I connect GND to breadboard negative, 3V3 to breadboard positive, SCL and SDA to appropriate flora ports.
2. I also plug VS1053 codec on the breadboard, and ground its #0 and GND, as well as connect #1 and 3V3 to the positive on the breadboard (other pins are the same as pianoglove)
3. I connect flora GND to breadboard negative, and flora 3.3V to breadboard positive.
My suspect:
1. My battery packs haven't arrived. So after uploading, I keep the computer USB connection to power the flora. But in the pianoglove guide, https://learn.adafruit.com/pianoglove/p ... e-378915-7, it says USB should be disconnected from the computer, and flora should be powered by the battery packs only. I wonder if that's causing the problem?
2. I might have connected VS1053 to the audio jack wrongly. I'm using the included 3.5mm audio jack to wired headphones. I plug the audio jack on the breadboard but not sure where should be its left or right port? I have attached a photo of my current connection.
If the pianoglove problem is solved, I hope to use DRV2605 driver, along with the multiplexer, to read audio signal from the codec and vibrate accordingly. In this way, color will ultimately be converted to haptic motion. Also any idea & tips on how to get the multiplexer do its work? I'm hoping that the codec (correct?) performs dual roles, both as a master and as a peripheral, to receive signals from the flora and then transport it to the haptic driver.
Thanks in advance!
ps: you can find my IDE output after uploading below if needed
Code: Select all
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\DELL\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\DELL\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\DELL\Documents\Arduino\libraries -fqbn=adafruit:avr:flora8 -vid-pid=239A_8004 -ide-version=10819 -build-path C:\Users\DELL\AppData\Local\Temp\arduino_build_597617 -warnings=none -build-cache C:\Users\DELL\AppData\Local\Temp\arduino_cache_116344 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.arduinoOTA.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17 -verbose C:\Users\DELL\Documents\Arduino\Flora_Piano_Glove\Flora_Pianoglove\Flora_Pianoglove.ino
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\arduino-builder -compile -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\DELL\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\DELL\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\DELL\Documents\Arduino\libraries -fqbn=adafruit:avr:flora8 -vid-pid=239A_8004 -ide-version=10819 -build-path C:\Users\DELL\AppData\Local\Temp\arduino_build_597617 -warnings=none -build-cache C:\Users\DELL\AppData\Local\Temp\arduino_cache_116344 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.arduinoOTA.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17 -verbose C:\Users\DELL\Documents\Arduino\Flora_Piano_Glove\Flora_Pianoglove\Flora_Pianoglove.ino
Using board 'flora8' from platform in folder: C:\Users\DELL\Documents\ArduinoData\packages\adafruit\hardware\avr\1.4.15
Using core 'arduino' from platform in folder: C:\Users\DELL\Documents\ArduinoData\packages\arduino\hardware\avr\1.8.5
Detecting libraries used...
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=8000000L -DARDUINO=10819 -DARDUINO_AVR_FLORA8 -DARDUINO_ARCH_AVR -DUSB_VID=0x239A -DUSB_PID=0x8004 "-DUSB_MANUFACTURER=\"Adafruit\"" "-DUSB_PRODUCT=\"Flora\"" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\cores\\arduino" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\variants\\flora" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp" -o nul
Alternatives for Wire.h: [[email protected] [email protected]]
ResolveLibrary(Wire.h)
-> candidates: [[email protected] [email protected]]
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=8000000L -DARDUINO=10819 -DARDUINO_AVR_FLORA8 -DARDUINO_ARCH_AVR -DUSB_VID=0x239A -DUSB_PID=0x8004 "-DUSB_MANUFACTURER=\"Adafruit\"" "-DUSB_PRODUCT=\"Flora\"" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\cores\\arduino" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\variants\\flora" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\libraries\\Wire" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp" -o nul
Alternatives for Adafruit_TCS34725.h: [[email protected]]
ResolveLibrary(Adafruit_TCS34725.h)
-> candidates: [[email protected]]
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=8000000L -DARDUINO=10819 -DARDUINO_AVR_FLORA8 -DARDUINO_ARCH_AVR -DUSB_VID=0x239A -DUSB_PID=0x8004 "-DUSB_MANUFACTURER=\"Adafruit\"" "-DUSB_PRODUCT=\"Flora\"" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\cores\\arduino" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\variants\\flora" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\libraries\\Wire" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_TCS34725" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp" -o nul
Alternatives for Adafruit_I2CDevice.h: [[email protected]]
ResolveLibrary(Adafruit_I2CDevice.h)
-> candidates: [[email protected]]
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=8000000L -DARDUINO=10819 -DARDUINO_AVR_FLORA8 -DARDUINO_ARCH_AVR -DUSB_VID=0x239A -DUSB_PID=0x8004 "-DUSB_MANUFACTURER=\"Adafruit\"" "-DUSB_PRODUCT=\"Flora\"" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\cores\\arduino" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\variants\\flora" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\libraries\\Wire" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_TCS34725" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp" -o nul
Alternatives for Adafruit_NeoPixel.h: [[email protected] [email protected]]
ResolveLibrary(Adafruit_NeoPixel.h)
-> candidates: [[email protected] [email protected]]
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=8000000L -DARDUINO=10819 -DARDUINO_AVR_FLORA8 -DARDUINO_ARCH_AVR -DUSB_VID=0x239A -DUSB_PID=0x8004 "-DUSB_MANUFACTURER=\"Adafruit\"" "-DUSB_PRODUCT=\"Flora\"" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\cores\\arduino" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\variants\\flora" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\libraries\\Wire" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_TCS34725" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_NeoPixel" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp" -o nul
Using cached library dependencies for file: C:\Users\DELL\Documents\ArduinoData\packages\adafruit\hardware\avr\1.4.15\libraries\Wire\TinyWireM.cpp
Using cached library dependencies for file: C:\Users\DELL\Documents\ArduinoData\packages\adafruit\hardware\avr\1.4.15\libraries\Wire\USI_TWI_Master.cpp
Using cached library dependencies for file: C:\Users\DELL\Documents\ArduinoData\packages\adafruit\hardware\avr\1.4.15\libraries\Wire\Wire.cpp
Using cached library dependencies for file: C:\Users\DELL\Documents\ArduinoData\packages\adafruit\hardware\avr\1.4.15\libraries\Wire\utility\twi.c
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_TCS34725\Adafruit_TCS34725.cpp
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_BusIO\Adafruit_BusIO_Register.cpp
Alternatives for SPI.h: [[email protected]]
ResolveLibrary(SPI.h)
-> candidates: [[email protected]]
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_BusIO\Adafruit_I2CDevice.cpp
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_BusIO\Adafruit_SPIDevice.cpp
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_NeoPixel\Adafruit_NeoPixel.cpp
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_NeoPixel\esp.c
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_NeoPixel\esp8266.c
Using cached library dependencies for file: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_NeoPixel\kendyte_k210.c
Using cached library dependencies for file: C:\Users\DELL\Documents\ArduinoData\packages\arduino\hardware\avr\1.8.5\libraries\SPI\src\SPI.cpp
Generating function prototypes...
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=8000000L -DARDUINO=10819 -DARDUINO_AVR_FLORA8 -DARDUINO_ARCH_AVR -DUSB_VID=0x239A -DUSB_PID=0x8004 "-DUSB_MANUFACTURER=\"Adafruit\"" "-DUSB_PRODUCT=\"Flora\"" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\cores\\arduino" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\variants\\flora" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\libraries\\Wire" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_TCS34725" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_NeoPixel" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\libraries\\SPI\\src" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp" -o "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\preproc\\ctags_target_for_gcc_minus_e.cpp"
"C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega32u4 -DF_CPU=8000000L -DARDUINO=10819 -DARDUINO_AVR_FLORA8 -DARDUINO_ARCH_AVR -DUSB_VID=0x239A -DUSB_PID=0x8004 "-DUSB_MANUFACTURER=\"Adafruit\"" "-DUSB_PRODUCT=\"Flora\"" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\cores\\arduino" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\variants\\flora" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\adafruit\\hardware\\avr\\1.4.15\\libraries\\Wire" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_TCS34725" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\DELL\\Documents\\Arduino\\libraries\\Adafruit_NeoPixel" "-IC:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\hardware\\avr\\1.8.5\\libraries\\SPI\\src" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp" -o "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp.o"
Compiling libraries...
Compiling library "Wire"
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Wire\TinyWireM.cpp.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Wire\USI_TWI_Master.cpp.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Wire\Wire.cpp.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Wire\utility\twi.c.o
Compiling library "Adafruit_TCS34725"
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_TCS34725\Adafruit_TCS34725.cpp.o
Compiling library "Adafruit_BusIO"
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_BusIO\Adafruit_I2CDevice.cpp.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_BusIO\Adafruit_BusIO_Register.cpp.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_BusIO\Adafruit_SPIDevice.cpp.o
Compiling library "Adafruit_NeoPixel"
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_NeoPixel\esp.c.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_NeoPixel\esp8266.c.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_NeoPixel\kendyte_k210.c.o
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\Adafruit_NeoPixel\Adafruit_NeoPixel.cpp.o
Compiling library "SPI"
Using previously compiled file: C:\Users\DELL\AppData\Local\Temp\arduino_build_597617\libraries\SPI\SPI.cpp.o
Compiling core...
Using precompiled core: C:\Users\DELL\AppData\Local\Temp\arduino_cache_116344\core\core_adafruit_avr_flora8_38686f15d02a043ed3e66e6dc0e3459d.a
Linking everything together...
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-gcc" -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega32u4 -o "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617/Flora_Pianoglove.ino.elf" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\sketch\\Flora_Pianoglove.ino.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Wire\\TinyWireM.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Wire\\USI_TWI_Master.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Wire\\Wire.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Wire\\utility\\twi.c.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_TCS34725\\Adafruit_TCS34725.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_BusIO\\Adafruit_BusIO_Register.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_BusIO\\Adafruit_I2CDevice.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_BusIO\\Adafruit_SPIDevice.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_NeoPixel\\esp.c.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_NeoPixel\\esp8266.c.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_NeoPixel\\kendyte_k210.c.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\Adafruit_NeoPixel\\Adafruit_NeoPixel.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617\\libraries\\SPI\\SPI.cpp.o" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617/..\\arduino_cache_116344\\core\\core_adafruit_avr_flora8_38686f15d02a043ed3e66e6dc0e3459d.a" "-LC:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617" -lm
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617/Flora_Pianoglove.ino.elf" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617/Flora_Pianoglove.ino.eep"
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy" -O ihex -R .eeprom "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617/Flora_Pianoglove.ino.elf" "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617/Flora_Pianoglove.ino.hex"
Multiple libraries were found for "Wire.h"
Used: C:\Users\DELL\Documents\ArduinoData\packages\adafruit\hardware\avr\1.4.15\libraries\Wire
Not used: C:\Users\DELL\Documents\ArduinoData\packages\arduino\hardware\avr\1.8.5\libraries\Wire
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_NeoPixel
Not used: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_NeoPixel-1.10.5
Using library Wire at version 1.0 in folder: C:\Users\DELL\Documents\ArduinoData\packages\adafruit\hardware\avr\1.4.15\libraries\Wire
Using library Adafruit_TCS34725 at version 1.4.1 in folder: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_TCS34725
Using library Adafruit_BusIO at version 1.11.6 in folder: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_BusIO
Using library Adafruit_NeoPixel at version 1.10.4 in folder: C:\Users\DELL\Documents\Arduino\libraries\Adafruit_NeoPixel
Using library SPI at version 1.0 in folder: C:\Users\DELL\Documents\ArduinoData\packages\arduino\hardware\avr\1.8.5\libraries\SPI
"C:\\Users\\DELL\\Documents\\ArduinoData\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino7/bin/avr-size" -A "C:\\Users\\DELL\\AppData\\Local\\Temp\\arduino_build_597617/Flora_Pianoglove.ino.elf"
Sketch uses 13398 bytes (46%) of program storage space. Maximum is 28672 bytes.
Global variables use 779 bytes of dynamic memory.
Forcing reset using 1200bps open/close on port COM7
PORTS {COM3, COM4, COM7, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, COM8, } => {COM8, }
Found upload port: COM8
C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude -CC:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM8 -b57600 -D -Uflash:w:C:\Users\DELL\AppData\Local\Temp\arduino_build_597617/Flora_Pianoglove.ino.hex:i
avrdude: Version 6.3-20190619
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "C:\Users\DELL\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf"
Using Port : COM8
Using Programmer : avr109
Overriding Baud Rate : 57600
AVR Part : ATmega32U4
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00
flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : butterfly
Description : Atmel AppNote AVR109 Boot Loader
Connecting to programmer: .
Found programmer: Id = "CATERIN"; type = S
Software Version = 1.0; No Hardware Version given.
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize=128 bytes.
Programmer supports the following devices:
Device code: 0x44
avrdude: devcode selected: 0x44
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9587 (probably m32u4)
avrdude: reading input file "C:\Users\DELL\AppData\Local\Temp\arduino_build_597617/Flora_Pianoglove.ino.hex"
avrdude: writing flash (13398 bytes):
Writing | ################################################## | 100% 1.12s
avrdude: 13398 bytes of flash written
avrdude: verifying flash memory against C:\Users\DELL\AppData\Local\Temp\arduino_build_597617/Flora_Pianoglove.ino.hex:
avrdude: load data flash data from input file C:\Users\DELL\AppData\Local\Temp\arduino_build_597617/Flora_Pianoglove.ino.hex:
avrdude: input file C:\Users\DELL\AppData\Local\Temp\arduino_build_597617/Flora_Pianoglove.ino.hex contains 13398 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 0.23s
avrdude: verifying ...
avrdude: 13398 bytes of flash verified
avrdude done. Thank you.