Good day to
I am trying to use QT Py stemma qt board
https://learn.adafruit.com/adafruit-qt-py
I installed board according to the guide from adafruit to work with Arduino IDE
https://learn.adafruit.com/adafruit-qt- ... rduino-ide
Then I tried to upload empy sketch to this board.
Board ItsyBitsy samd51
Sketch uploaded successfully but serial port disappeared from windows.
I can restored it only pressing 5 times to reset button. What I did wrong?
Thank you!
Arduino IDE with QT Py stemma qt serial port disappear after uploading the sketch
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Legatinka1
- Posts: 1
- Joined: Tue Aug 23, 2022 11:20 am
- dastels
- Posts: 15674
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Arduino IDE with QT Py stemma qt serial port disappear after uploading the sketch
Yes, it will disappear because the board resets after loading the sketch finishes. It's odd that it didn't reconnect on its own right away but I've seen that sort of thing happen.
Dave
Dave
Please be positive and constructive with your questions and comments.