Trinket M0 turns on but doesn't connect to Arduino IDE

Adafruit's tiny microcontroller platform. Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
vidagabriel
 
Posts: 1
Joined: Tue Aug 30, 2022 11:01 am

Trinket M0 turns on but doesn't connect to Arduino IDE

Post by vidagabriel »

My trinket works, but it also doesn't...

Upon plugging in my trinket M0, the green and red LED's turn on, the red flashes for a bit, and then it's only the green ON light. I'm not seeing the purple LED turn on, and the Arduino IDE platform can't see the trinket.
I've done the following troubleshooting:
- used different cables
- checked all connections
- reset the trinket

I have 3 trinkets; two of them are working fine (code uploaded, running my sensors just fine) but this third one is driving me up the wall. I tested all my sensors using the working Trinkets so I know the sensor isn't causing the problem. Any idea why it's able to turn on but not connect to my PC?

User avatar
adafruit_support_carter
 
Posts: 29150
Joined: Tue Nov 29, 2016 2:45 pm

Re: Trinket M0 turns on but doesn't connect to Arduino IDE

Post by adafruit_support_carter »

Are all 3 Trinkets the same model? The Trinket M0:
https://www.adafruit.com/product/3500

None of these are the older original Trinket?
https://www.adafruit.com/product/1500

Locked
Please be positive and constructive with your questions and comments.

Return to “Trinket ATTiny, Trinket M0”