I've connected a Metro Mini v2 (https://www.adafruit.com/product/5597) with a FeatherWing OLED (https://learn.adafruit.com/adafruit-128 ... g/overview) over STEAMMA QT (I2C). According to the example code at https://learn.adafruit.com/adafruit-128 ... duino-code it seems button A, B, and C should be pin 9, 6 and 5;
Code: Select all
// 32u4, M0, M4, nrf52840, esp32-s2 and 328p
#define BUTTON_A 9
#define BUTTON_B 6
#define BUTTON_C 5
Are the pins wrong or do I have to connect jumper cables from the A,B and C on the FeatherWing to my Metro Mini v2?
-Idar