Hi!
I hope to do the right things here.
I am not experienced in this way to register defektive parts!
Please look a the foto, they can not work.
We have bought them at Sertronics GmbH, Berrybase, Berlin, see attachment.
Two of four do not work!
Please help us, we need spareparts.
Thank you!
Werner Kramer
Strahlbright GmbH
Miebachstr 5
53498 Bad Breisig
01771477489
Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- WernerKramer
- Posts: 4
- Joined: Mon Oct 31, 2022 7:33 am
Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
- Attachments
-
- RE-16884574.pdf
- (70.13 KiB) Downloaded 6 times
-
- 7AAA6379-2F56-48A0-9820-E1143E659CF7.jpeg (473.91 KiB) Viewed 158 times
- adafruit_support_carter
- Posts: 29189
- Joined: Tue Nov 29, 2016 2:45 pm
Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
This is the product you are using?
https://www.adafruit.com/product/4280
Can you clarify what is being shown in the photo. There appears to be solder or something in the header connector of the Bonnet?
https://www.adafruit.com/product/4280
Can you clarify what is being shown in the photo. There appears to be solder or something in the header connector of the Bonnet?
- WernerKramer
- Posts: 4
- Joined: Mon Oct 31, 2022 7:33 am
Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
Hi1
Yes, so it is unusable.
What can I do?
Thanks for answering!
Werner
Yes, so it is unusable.
What can I do?
Thanks for answering!
Werner
- Franklin97355
- Posts: 23912
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
Can you post a picture of the other side and a wider shot of this side? The surface mount header is soldered on the back and the holes are not used as a result.
- WernerKramer
- Posts: 4
- Joined: Mon Oct 31, 2022 7:33 am
Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
Hi!
Thanks for your answer!
I add some fotos.
Fotos 4280_SB_03 shows different soldering
Maybe used parts?
How can I get replacement parts?
Kind regards!
Werner
Thanks for your answer!
I add some fotos.
Fotos 4280_SB_03 shows different soldering
Maybe used parts?
How can I get replacement parts?
Kind regards!
Werner
- Attachments
-
- 4280_SB_05.jpg (507.52 KiB) Viewed 132 times
- WernerKramer
- Posts: 4
- Joined: Mon Oct 31, 2022 7:33 am
Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
Hi!
The soldering in 4280_SB_03.jpg was done by our engineer.
Best wishes
Werner
The soldering in 4280_SB_03.jpg was done by our engineer.
Best wishes
Werner
- adafruit2
- Posts: 22149
- Joined: Fri Mar 11, 2005 7:36 pm
Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi
we have some that were soldered through - you can email support@adafruit for replacements
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/