Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
WernerKramer
 
Posts: 4
Joined: Mon Oct 31, 2022 7:33 am

Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Post by WernerKramer »

Hi!

I hope to do the right things here.

I am not experienced in this way to register defektive parts!
Please look a the foto, they can not work.
We have bought them at Sertronics GmbH, Berrybase, Berlin, see attachment.

Two of four do not work!

Please help us, we need spareparts.

Thank you!

Werner Kramer
Strahlbright GmbH
Miebachstr 5
53498 Bad Breisig

01771477489
Attachments
RE-16884574.pdf
(70.13 KiB) Downloaded 6 times
7AAA6379-2F56-48A0-9820-E1143E659CF7.jpeg
7AAA6379-2F56-48A0-9820-E1143E659CF7.jpeg (473.91 KiB) Viewed 155 times

User avatar
adafruit_support_carter
 
Posts: 29056
Joined: Tue Nov 29, 2016 2:45 pm

Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Post by adafruit_support_carter »

This is the product you are using?
https://www.adafruit.com/product/4280

Can you clarify what is being shown in the photo. There appears to be solder or something in the header connector of the Bonnet?

User avatar
WernerKramer
 
Posts: 4
Joined: Mon Oct 31, 2022 7:33 am

Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Post by WernerKramer »

Hi1

Yes, so it is unusable.
What can I do?

Thanks for answering!
Werner

User avatar
Franklin97355
 
Posts: 23903
Joined: Mon Apr 21, 2008 2:33 pm

Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Post by Franklin97355 »

Can you post a picture of the other side and a wider shot of this side? The surface mount header is soldered on the back and the holes are not used as a result.

User avatar
WernerKramer
 
Posts: 4
Joined: Mon Oct 31, 2022 7:33 am

Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Post by WernerKramer »

Hi!
Thanks for your answer!
I add some fotos.
Fotos 4280_SB_03 shows different soldering
Maybe used parts?
How can I get replacement parts?
Kind regards!
Werner
4280_SB_02.jpg
4280_SB_02.jpg (516.24 KiB) Viewed 129 times
4280_SB_03.jpg
4280_SB_03.jpg (593.19 KiB) Viewed 129 times
Attachments
4280_SB_05.jpg
4280_SB_05.jpg (507.52 KiB) Viewed 129 times

User avatar
WernerKramer
 
Posts: 4
Joined: Mon Oct 31, 2022 7:33 am

Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Post by WernerKramer »

Hi!
The soldering in 4280_SB_03.jpg was done by our engineer.
Best wishes
Werner

User avatar
adafruit2
 
Posts: 22111
Joined: Fri Mar 11, 2005 7:36 pm

Re: Adafruit DC & Stepper Motor Bonnet für Raspberry Pi

Post by adafruit2 »

we have some that were soldered through - you can email support@adafruit for replacements

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”