Hello everyone! I am pretty new to microcontrollers so I got a lot of silly questions. Really appreciate your time if you are answering this one.
I am programming my Circuit Playground Express as a mouse with built-in accelerometers. RN I am connecting my PC and playground with a micro USB cable to upload the sketch and receive the input from the microcontroller. Can I add a Bluetooth or Wi-Fi module to replace that cable? If so, may I have some suggestions on the kinds of modules and instructions/guides I should look into?
Thank you all!
Circuit Playground Express with Wi-Fi or Bluetooth?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- zts0727
- Posts: 2
- Joined: Wed Jul 19, 2017 7:36 pm
- mikeysklar
- Posts: 14092
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Circuit Playground Express with Wi-Fi or Bluetooth?
There is a way to do all the development wirelessly, but you will need to change boards.
You have a Circuit Playground Express which does not support WiFi or BLE in any easily connected way, but you can use a Circuit Playground Bluefruit to do what you want. See the guide below and product page below that.
https://learn.adafruit.com/wirelessly-c ... cuitpython
https://www.adafruit.com/product/4333
You have a Circuit Playground Express which does not support WiFi or BLE in any easily connected way, but you can use a Circuit Playground Bluefruit to do what you want. See the guide below and product page below that.
https://learn.adafruit.com/wirelessly-c ... cuitpython
https://www.adafruit.com/product/4333
- zts0727
- Posts: 2
- Joined: Wed Jul 19, 2017 7:36 pm
Re: Circuit Playground Express with Wi-Fi or Bluetooth?
Thanks for sharing that! They are really helpful. I saw the tools are for CircuitPython. Is there any Arduino compatible methods? Thank you!mikeysklar wrote: ↑Fri Nov 11, 2022 11:13 am There is a way to do all the development wirelessly, but you will need to change boards.
You have a Circuit Playground Express which does not support WiFi or BLE in any easily connected way, but you can use a Circuit Playground Bluefruit to do what you want. See the guide below and product page below that.
https://learn.adafruit.com/wirelessly-c ... cuitpython
https://www.adafruit.com/product/4333
- mikeysklar
- Posts: 14092
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Circuit Playground Express with Wi-Fi or Bluetooth?
The short answer is no. Adafruit does not currently provide a way to program / upload code using the Arduino IDE using OTA (Over The Air).
That being said people have cobbled together solutions using older bluetooth adapters like the HC-05.
In the short term is wireless is important CircuitPython will do it today. More OTA options are popping up so it is coming.
That being said people have cobbled together solutions using older bluetooth adapters like the HC-05.
In the short term is wireless is important CircuitPython will do it today. More OTA options are popping up so it is coming.
Please be positive and constructive with your questions and comments.