I'm having some troubles getting my Music Maker FeatherWing running. I'm trying to build an juke box for my daughter and descided to use the Adafruit ESP32 Feather V2 in combination with the Music Maker FeatherWing with Amp.
I followed all the installation instruction for the ESP32 and the Music FeatherWing. Everything seemed to work fine, I could upload the example sketch "feather player" but in the serial monitor I'm always getting this Error:
Code: Select all
Adafruit VS1053 Simple Test
Couldn't find VS1053, do you have the right pins defined?
I even tried a new ESP32 Feather V2 board with connector pins where the wing could be stack directly on top of the feather because I suspected doing something wrong in the wiring on the breadboard (even tough I connected ALL pins to be sure all necessary pins are connected). I also double checked the soldering with the multimeter. Everything looks fine. I can even hear a white noise in the speaker as soon as the feather gets powered up and the wing gets slightly warm after some minutes (not hot just warm) around the amp (guess the chip right next to the speaker connectors ist the amp).
Does anyone have any experience with the ESP32 Feather V2 in combination with the Music Maker FeatherWing? Could it be any software/firmeware problem? Is there a way to debug the wing? Or am I the unlucky one who got a faulty board?
Thanks for any help!
Patrick