Hi just wondering what size screws are used for this product to mount this onto a surface? Also, is there any dimensions for the positions of these holes?
The website says 'Mounting Hole Distances: 30mm x 26mm', but what does this mean specifically?
Unassembled Mini Pan-Tilt Kit (Without Micro Servos)
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- afiqamran17
- Posts: 2
- Joined: Thu Nov 17, 2022 6:07 pm
- adafruit_support_bill
- Posts: 88112
- Joined: Sat Feb 07, 2009 10:11 am
Re: Unassembled Mini Pan-Tilt Kit (Without Micro Servos)
The screws that come with it are equivalent to about a #4 size and work well in wood or plastic (may require some pre-drilling). For mounting to a metal surface, you could use M3 or 4-40 machine screws.
The 4 mounting holes in the base are arranged in a rectangular pattern. 26mm in one dimension and 30mm in the other.
The 4 mounting holes in the base are arranged in a rectangular pattern. 26mm in one dimension and 30mm in the other.
- afiqamran17
- Posts: 2
- Joined: Thu Nov 17, 2022 6:07 pm
Re: Unassembled Mini Pan-Tilt Kit (Without Micro Servos)
Ok thanks, ill use M3 screws to mount it. Also, the rectangular pattern means the corners are on the center of the mounting holes correct?
- adafruit_support_bill
- Posts: 88112
- Joined: Sat Feb 07, 2009 10:11 am
Re: Unassembled Mini Pan-Tilt Kit (Without Micro Servos)
Yes, that is correct.
Please be positive and constructive with your questions and comments.