Regarding this ANCS project, what would be the absolute fastest option for running this that runs CircuitPython without any headaches? Project will have an OLED display (128x128 probably). I'm guessing a raspberry pi, but I don't have a great grasp on what CircuitPython compatibility for the rpi looks like.
Can a raspberry pi (zero?) run all of the bluetooth related things in the ANCS project? If not what's my next best option for a speedy board with minimal lag that's written in CircuitPython?
Help choosing board for ANCS Bluetooth project
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- burrito_poots
- Posts: 134
- Joined: Thu May 30, 2019 5:02 pm
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Help choosing board for ANCS Bluetooth project
The project was made with a Circuit Playground Bluefruit and a TFT Gizmo:
https://www.adafruit.com/product/4333
https://www.adafruit.com/product/4367
That Circuit Playground runs CircuitPython, and you should be able to follow the tutorial directly.
As RasPi could be made to do something similar (if you could get one), but that would require major modification.
https://www.adafruit.com/product/4333
https://www.adafruit.com/product/4367
That Circuit Playground runs CircuitPython, and you should be able to follow the tutorial directly.
As RasPi could be made to do something similar (if you could get one), but that would require major modification.
Please be positive and constructive with your questions and comments.