Adafruit DC & Stepper Motor Bonnet and Raspberry Pi Pico

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
mrvl
 
Posts: 1
Joined: Thu Jan 26, 2023 9:12 pm

Adafruit DC & Stepper Motor Bonnet and Raspberry Pi Pico

Post by mrvl »

Hi, I bought an Adafruit DC & Stepper Motor Bonnet for Raspberry Pi Product ID: 4280 to use with a RPi Zero 2 W. However, I am using the RPi Zero 2 W for another project. I have a RPi Pico W unused and I was wondering if I can use the DC and stepper motor bonnet with the RPi Pico W. In the description it says it is compatible with all Raspberry Pi models but it does not mention RPi Pico. Thanks

User avatar
adafruit_support_carter
 
Posts: 29056
Joined: Tue Nov 29, 2016 2:45 pm

Re: Adafruit DC & Stepper Motor Bonnet and Raspberry Pi Pico

Post by adafruit_support_carter »

In general, no. The Pico is much different than the Single Board Computer Pi's the Bonnet was designed for.

However, since the Bonnet only uses I2C, it may be possible. You'd need to use the pinout and schematic info for the Bonnet to figure out the connections:
https://learn.adafruit.com/adafruit-dc- ... /downloads
There's no specific information available showing how to connect the Pico to the Bonnet.

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”