Can I get the code for this demo. Including the feather board, oked, and EMC2101. This is exactly what I want to build but can't figure out how to dev code. Nube.
https://youtu.be/jKwln3jQrQA
Code for demo of EMC2101
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_carter
- Posts: 29457
- Joined: Tue Nov 29, 2016 2:45 pm
Re: Code for demo of EMC2101
There's an Arduino sketch here:
https://github.com/adafruit/Adafruit_EM ... d_test.ino
It looks like it might be slightly different based on the display.print() lines. But it has the basic code needed for a 128x32 OLED.
https://github.com/adafruit/Adafruit_EM ... d_test.ino
It looks like it might be slightly different based on the display.print() lines. But it has the basic code needed for a 128x32 OLED.
- Mhov
- Posts: 14
- Joined: Wed Apr 13, 2016 3:31 pm
Re: Code for demo of EMC2101
Awesome. Thank you!
- Mhov
- Posts: 14
- Joined: Wed Apr 13, 2016 3:31 pm
Re: Code for demo of EMC2101
One other question, I was trying to use Makecode to program this but can't load the EMC2101 drivers into the simulator. I tried via the add attributes. Is this supported on the Adafruit makecode platform?
- adafruit_support_carter
- Posts: 29457
- Joined: Tue Nov 29, 2016 2:45 pm
Re: Code for demo of EMC2101
There are only Arduino and CircuitPython drivers available for the EMC2101:
https://learn.adafruit.com/emc2101-fan- ... ure-sensor
https://learn.adafruit.com/emc2101-fan- ... ure-sensor
- Mhov
- Posts: 14
- Joined: Wed Apr 13, 2016 3:31 pm
Re: Code for demo of EMC2101
Can I take the corcuitpython code for the emc2101 and paste it into the microcode platform? If yes, would that code get merged with the code i already have built with the vlock cide? Again newbe here. Trying to learn and do some if this myself.
Please be positive and constructive with your questions and comments.