Fusion BrkOut 2470 Connections

Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
hucker233
 
Posts: 2
Joined: Sun Mar 19, 2023 7:47 pm

Fusion BrkOut 2470 Connections

Post by hucker233 »

I ordered the fusion BrkOut board 2472 thinking it had a STEMMA connector.

Unfortunately for me I should have ordered the 4646 board that has the STEMMA connectors.

Can I just take a STEMMA jumper connector cable and solder the bare wires on one end to the pads and plug the JST into my FeatherS2 or is there something unique going on with STEMMA beyond getting the connections right. It looks like I can just solder these u and be good to go:

Green for SCL
White for SDA
Red for V+
Black for GND

User avatar
dastels
 
Posts: 15656
Joined: Tue Oct 20, 2015 3:22 pm

Re: Fusion BrkOut 2470 Connections

Post by dastels »

The STEMMA-QT connectors simple replicate the I2C connections in a solderless plug-n-play format. You can wire to the appropriate pads. See https://learn.adafruit.com/introducing- ... ical-specs for specifics. Note that the FeatherS2 has a JST-SH STEMMA-QT connector, not the larger JST-PH STEMMA connectors as on the PyPortal.

Dave

User avatar
hucker233
 
Posts: 2
Joined: Sun Mar 19, 2023 7:47 pm

Re: Fusion BrkOut 2470 Connections

Post by hucker233 »

Thanks for your help, the board is working as expected via our hacked in STEMMA connector.

Locked
Please be positive and constructive with your questions and comments.

Return to “Feather - Adafruit's lightweight platform”