Hi,
I've purchased 3 ST-link V2 from Digikey (sales order number: 80604059). But those programmers don't work. The STM32CubeProgrammer couldn't really recognize it. The serial is apparently wrong, and it couldn't connect to the target. I'm also attaching a picture of a working one.
I've googled around and found this is a common issue for a knock-off ST-Link. I would have a higher expectation for Adafruit's product.
Thoughts on fixing these programmers?
Defective ST-Link V2 clone
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- yesheng
- Posts: 1
- Joined: Tue Mar 28, 2023 9:29 pm
Defective ST-Link V2 clone
- Attachments
-
- working ST-Link
- Screenshot_4.png (293.45 KiB) Viewed 69 times
-
- Adafruit's ST-Link
- Screenshot_3.png (271.82 KiB) Viewed 69 times
- barshatriplee
- Posts: 200
- Joined: Wed Mar 22, 2023 10:11 am
Re: Defective ST-Link V2 clone
What is your OS? Is it windows 10?
- freddyboomboom
- Posts: 267
- Joined: Wed Feb 16, 2022 7:55 pm
Re: Defective ST-Link V2 clone
Looking at the product page: https://www.adafruit.com/product/2548
It doesn't look like Adafruit actually makes them.
Have you contacted the vendor, Digikey?
Does it work with ST-Link?
It doesn't look like Adafruit actually makes them.
Have you contacted the vendor, Digikey?
Does it work with ST-Link?
- adafruit_support_mike
- Posts: 67391
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Defective ST-Link V2 clone
Open the plastic enclosure and see what part number the main chip has.
Please be positive and constructive with your questions and comments.