Hi,
I have a system that is trying to control 5 stepper motors using 3 stacked motor shields v2 on an Arduino Uno. I would like to control the direction of movement for the stepper motors on LabVIEW using the new Hobbyist Toolkit package by NI. Are there any resources that could assist me with this?
Thank you.
Motor Shield v2 Interface with LabVIEW
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88087
- Joined: Sat Feb 07, 2009 10:11 am
Re: Motor Shield v2 Interface with LabVIEW
Labview and the Hobbyist Toolkit are National Instruments products. We are not familiar with their operation or how they interface to Arduino devices. National Instruments should be able to provide technical assistance with that.
Documentation for the Motor Shields and links to the Adafruit supported libraries can be found here: https://learn.adafruit.com/adafruit-mot ... o/overview
Documentation for the Motor Shields and links to the Adafruit supported libraries can be found here: https://learn.adafruit.com/adafruit-mot ... o/overview
Please be positive and constructive with your questions and comments.