Hi!
I have three boxes that use an Adafruit SCD30 CO2 sensor, connected via I2C to an Arduino Nano. (As well as an atmospheric pressure sensor and a real-time clock). I am, of course, using the Adafruit SCD30 library.
All these devices work, but all three of these boxes hang up every few days, with what I strongly suspect is the SCD30 hanging up the I2C bus.
I would include the PDF I wrote about my boxes (with photos, code, circuit etc) but it's too big to be included here, alas.
Any help welcome.
Michael
SCD30 hanging
Moderators: adafruit_support_bill, adafruit
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
- barshatriplee
- Posts: 200
- Joined: Wed Mar 22, 2023 10:11 am
Re: SCD30 hanging
I think this is a common problem: https://github.com/Ribbit-Network/ribbi ... /issues/61
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.