i have the LSM303AGR breakout board.
1. it scans and comes up with 2 i2c address
I2C scanner. Scanning ...
Found address: 25 (0x19)
Found address: 30 (0x1E)
There is/are 2 device(s).
2. install all the lib as instructed over here
https://learn.adafruit.com/lsm303-accel ... out/coding
3. when i run the magsensor example, i get this error
Magnetometer Test
Ooops, no LSM303 detected ... Check your wiring!
I see no issues with the hardware setup and i am using this sensor with arduino nano and this i2c adapter https://store.ncd.io/product/i2c-shield ... uino-nano/
any help will be appreciated!!!!
LSM303AGR wont communicate with adafruit lib
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- batman420
- Posts: 2
- Joined: Thu May 19, 2016 5:41 pm
Please be positive and constructive with your questions and comments.