RP2040 RFM9x circuit py stopped showing up

Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
karllumpkins
 
Posts: 9
Joined: Wed May 02, 2012 11:32 pm

RP2040 RFM9x circuit py stopped showing up

Post by karllumpkins »

I did something wrong and need recover info. Now instead of circuit py showing in the list, it reads 7.3mb.
Hopefully I can return the rp2040 rfm95 board back to a "normal" state? I tried the nuke.uf2 but it just deposited the file in the 7.3 mb "drive". Tks

User avatar
karllumpkins
 
Posts: 9
Joined: Wed May 02, 2012 11:32 pm

Re: RP2040 RFM9x circuit py stopped showing up

Post by karllumpkins »

Let me add this is with circuitpython, as there is no arduino ver. yet for raspi. (must be 1.8.2 or higher for adafruit boards). This occured after the "adafruit-circuitpython-adafruit_feather_rp2040_rfm-en_US-8.1.0-rc.0.uf2" was saved to the board. Now instead of circuit py it displays as "7.3 MB Volume" (indicating the flash mem on the card I guess)
and even after facory reset and nuke.uf2 it won't return to circuit py so that Mu will "see" it. So now i cannot use
circuit python or arduino. Anyone want a good deal on a $29 board?

Locked
Please be positive and constructive with your questions and comments.

Return to “Feather - Adafruit's lightweight platform”