Macropad RP2040 neopixel failure

Breakout boards, sensors, other Adafruit kits, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
_CRV
 
Posts: 3
Joined: Sun Mar 01, 2015 5:28 pm

Macropad RP2040 neopixel failure

Post by _CRV »

Hello friends at Adafruit,

After a bit over a month of perfect operation of my Macropad RP2040 Bare Bones (order 3054269-6121569874) I seem to have lost all but the top left neopixel operation. All buttons still function along with the oled and rotary encoder but no joy on the pixels for anything other than key 1. Here are the steps I've taken to troubleshoot:
Any assistance in troubleshooting would be appreciated but at this stage I'm worried this is a hardware problem. The link below is a quick video of how things look using the flashed demo (mentioned above).

https://imgur.com/a/thCIVnQ

User avatar
Franklin97355
 
Posts: 23910
Joined: Mon Apr 21, 2008 2:33 pm

Re: Macropad RP2040 neopixel failure

Post by Franklin97355 »

Can you post pictures of your soldering? Did you get product 5100 and what else did you get from us?

User avatar
_CRV
 
Posts: 3
Joined: Sun Mar 01, 2015 5:28 pm

Re: Macropad RP2040 neopixel failure

Post by _CRV »

No soldering on my part, this was the 5100.

User avatar
Franklin97355
 
Posts: 23910
Joined: Mon Apr 21, 2008 2:33 pm

Re: Macropad RP2040 neopixel failure

Post by Franklin97355 »

OK, let's replace it. Contact [email protected] with a link to this thread and they will replace it for you.

User avatar
_CRV
 
Posts: 3
Joined: Sun Mar 01, 2015 5:28 pm

Re: Macropad RP2040 neopixel failure

Post by _CRV »

Thanks!

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Products from Adafruit”