I'm interested in Adafruit's Brass Liquid Solenoid Valve - Product ID: 996
From the product photos and specs, there does not seem to be an obvious way to mount these valves. My first thought would be to use the bolts that bind the valve with the solenoid, but I'm loath to break the gasket seal.
Suggestions?
Product Hardware/Mechanical Questions
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Product Hardware/Mechanical Questions
The valves themselves do not have mounting tabs, I typically use a pipe clamp on the infeed and/or outfeed pipes, close to the valve.
- bfree
- Posts: 2
- Joined: Sun May 28, 2023 4:52 pm
Re: Product Hardware/Mechanical Questions
Thanks!adafruit_support_bill wrote: ↑Sun May 28, 2023 6:11 pm I typically use a pipe clamp on the infeed and/or outfeed pipes
Please be positive and constructive with your questions and comments.