https://www.adafruit.com/product/5766
It appears that one needs the Seesaw pin in order to initialize the Neopixel library and that information is not on the page and there is no "learn" guide for this board that I can find. Am I missing something somewhere or is this information just not published (yet)?
NeoPixel I2C driver board missing seesaw info
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- dastels
- Posts: 15670
- Joined: Tue Oct 20, 2015 3:22 pm
Re: NeoPixel I2C driver board missing seesaw info
It's a new product so there is probably a guide in the works.
Dave
Dave
- edgjr
- Posts: 143
- Joined: Mon Jan 16, 2012 6:18 pm
Re: NeoPixel I2C driver board missing seesaw info
@cater suggested 15 on Discord and that was the right one - happy camper.
- adafruit2
- Posts: 22149
- Joined: Fri Mar 11, 2005 7:36 pm
Re: NeoPixel I2C driver board missing seesaw info
guide is going live shortly :) thank you for your patience
- jclark2019
- Posts: 7
- Joined: Tue Feb 01, 2022 12:10 pm
Please be positive and constructive with your questions and comments.