Accent and Slide CV out?

Discuss mods, hacks, tweaks, etc.

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
Pish
 
Posts: 85
Joined: Sun Jul 29, 2012 8:54 am

Accent and Slide CV out?

Post by Pish »

Is it possible to do these? I have modded my MC202 with Pitch/Gate/Accent/Port CV ins.

I'm trying to see if I can add these to my x0xbox and possibly even build another x0xb0x but just as a sequencer for the MC202.

Cheers

User avatar
paradigm x
 
Posts: 237
Joined: Sun Feb 07, 2010 3:49 pm

Re: Accent and Slide CV out?

Post by paradigm x »

bump

id like this too

particularly a gate which goes high when slide is active. same for accent but beleive this is done from collector of q35?

manyt hanks

User avatar
Nordcore
 
Posts: 99
Joined: Sat May 23, 2015 3:14 pm

Re: Accent and Slide CV out?

Post by Nordcore »

Collector of Q29 has the slide signal, switching from 0 (off) to 12V (on).
Replace R92 with 10k Resistor, put 1k in series from Collector to socket pin. (Current limiter in case of "wrong" patches)
If you short this output/signal it will still mute the internal "slide on" but not doing any other harm.

Same with Q35 for accent. Here change R139 from 100k to 10k. Accent ON has 12V signal.

User avatar
antto
 
Posts: 1636
Joined: Thu Apr 15, 2010 3:21 pm

Re: Accent and Slide CV out?

Post by antto »

i haven't looked into the schematic right now, but the accent has inverted logic from the sequencer
high means off

User avatar
Nordcore
 
Posts: 99
Joined: Sat May 23, 2015 3:14 pm

Re: Accent and Slide CV out?

Post by Nordcore »

Q35 acts as inverter, so its that accent output is not inverted.

... but slide will be inverted: use collector of Q30 (with R93 from 100k to 10k) to have a not inverted slide output.

User avatar
paradigm x
 
Posts: 237
Joined: Sun Feb 07, 2010 3:49 pm

Re: Accent and Slide CV out?

Post by paradigm x »

thanks. ill do it when i take my x0x apart

having so much fun jamming tho that this may be a while!

cheers

Locked
Please be positive and constructive with your questions and comments.

Return to “x0xm0dz”