AVR Dragon + SpokePOV
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
AVR Dragon + SpokePOV
Could be used AVRdragon for programming SpokePOV?
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: AVR Dragon + SpokePOV
You would use the SPI programming method, as documented here:
http://www.atmel.no/webdoc/avrdragon/av ... ption.html
http://www.atmel.no/webdoc/avrdragon/av ... ption.html
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
Re: AVR Dragon + SpokePOV
I did it like this but spokepov.app (1.4) failed to open the port.
But with avrdude it's normaly working and I flashed spokepov.hex. and I hope with right fuses (-U lfuse:w:0x64:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m0)
I'm on osx 10.8.5 but i tried also 10.6.2. Still with same result.
Could you please share with me default hex files for 2313 and eeprom? I would like to burn it all with avrdude to see if everthing is ok.
regards
But with avrdude it's normaly working and I flashed spokepov.hex. and I hope with right fuses (-U lfuse:w:0x64:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m0)
I'm on osx 10.8.5 but i tried also 10.6.2. Still with same result.
Could you please share with me default hex files for 2313 and eeprom? I would like to burn it all with avrdude to see if everthing is ok.
regards
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: AVR Dragon + SpokePOV
Oh - the spokePOV.app won't work with the Dragon. It's looking for a USBtinyISP.
The hex file is linked on the tutorial downloads page.
Here's the direct link:
http://www.ladyada.net/media/spokepov/s ... re1_01.zip
The hex file is linked on the tutorial downloads page.
Here's the direct link:
http://www.ladyada.net/media/spokepov/s ... re1_01.zip
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
Re: AVR Dragon + SpokePOV
and does this .hex includes also some default pictures?
kind regards
kind regards
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: AVR Dragon + SpokePOV
I believe it does, yes.
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
Re: AVR Dragon + SpokePOV
I flash it again with avrdude and those fuses (-U lfuse:w:0x64:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m0)
I'm right?
I'm right?
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
Re: AVR Dragon + SpokePOV
or -U lfuse:w:0xe4:m -U hfuse:w:0x9d:m
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: AVR Dragon + SpokePOV
Where did you get those fuse values? Those aren't the ones in the makefile.
The makefile burns these fuse values: -U lfuse:w:0xe4:m -U hfuse:w:0x9d:m
Also, I looked at the source code, and it does not contain any default pictures. So the .hex file will not have pictures after all.
Sorry.
The makefile burns these fuse values: -U lfuse:w:0xe4:m -U hfuse:w:0x9d:m
Also, I looked at the source code, and it does not contain any default pictures. So the .hex file will not have pictures after all.
Sorry.
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
Re: AVR Dragon + SpokePOV
thanks for fuses.
good to know, that there're no pictures in .hex
I have to build serialISP and find some old PC.
could you share with me schematic for your serial ISP dongle?
good to know, that there're no pictures in .hex
I have to build serialISP and find some old PC.
could you share with me schematic for your serial ISP dongle?
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Please be positive and constructive with your questions and comments.