Product Placement

Forum announcements

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
europasteve
 
Posts: 12
Joined: Mon Nov 07, 2011 8:38 am

Product Placement

Post by europasteve »

You were on MythBusters! Zombie Ax
Image
Image
Image
https://www.adafruit.com/products/2472
Last edited by europasteve on Sun Feb 07, 2016 11:05 am, edited 2 times in total.

User avatar
adafruit_support_bill
 
Posts: 88037
Joined: Sat Feb 07, 2009 10:11 am

Re: Product Placement

Post by adafruit_support_bill »

Cool! Thanks for posting that.

User avatar
jonRank
 
Posts: 1
Joined: Tue Jul 12, 2016 3:25 pm

Re: Product Placement

Post by jonRank »

On my last order there two Raspberry Pi Cameras V2. One works great the other won't work. I get a "No data from sensor", erro. I've tried it on a known good Pi 3 that has a working camer as well as trying different cables on the camera.
order # 1140912

I like a replacement. Send me an RMA number and I'll ship the bad one back.

Thanks,
J. Rank
[email protected]

User avatar
xiaohong_hua
 
Posts: 1
Joined: Tue Nov 08, 2016 10:24 pm

Re: Product Placement

Post by xiaohong_hua »

After receiving TFP401 HDMI/DVI Decoder to 40­Pin TTL Breakout ­ With Touch ,from view check found :

1: one board' inductor physical damaged ,refer to attach photo.

2: PCBA's connector &IC some PIN solder dry &less,refer to attach photo1.

3:insert flex cable to this Board’s connector hard difficult, if insert not properly case display peoblem. Refer to attach photo .

At view checking this board already failed, Based on the test result,we hope to replacement another board due to this board use for medical equipment need have good quality .if possible let we know can replace another Board for us?or give us technical support?
Attachments
photo5-display unnormal.jpg
photo5-display unnormal.jpg (224.9 KiB) Viewed 5416 times
photo1-physcial damaged.jpg
photo1-physcial damaged.jpg (498.49 KiB) Viewed 5416 times

User avatar
dhongki
 
Posts: 13
Joined: Mon Aug 21, 2017 5:25 am

Re: Product Placement

Post by dhongki »

Is this thread still open? I just purchase a powerboost 500 that is overheating. the same component above causes the heat.

https://drive.google.com/open?id=15Zyxm ... RNmGEVrF2U
https://drive.google.com/open?id=1PdPmt ... y8Aek7q0tO

User avatar
adafruit_support_bill
 
Posts: 88037
Joined: Sat Feb 07, 2009 10:11 am

Re: Product Placement

Post by adafruit_support_bill »

@dhongki
@xiaohong_hua
@ BANNED

Your posts are off-topic for this thread and this forum. Please post your question in an appropriate forum.

Locked
Please be positive and constructive with your questions and comments.

Return to “Announcements”